Tuesday, February 8, 2011

Bloodpact Looted Truck Finished pics

Hello again fellow hobbyists,
I have returned with what was promised, pictures of the completed truck!

I'll run through a list of the additions that were made before and after I started painting that aren't shown in the WIP pictures in the previous blog, and if theres anything I haven't listed that takes your interest just comment me. I can't quite recall how I achieved the colours atm but if asked I'm sure I can go dig up some paints list from somewhere.

First off is the obvious barbed wire, which was added right in the final stages of painting. Its the standard GW wire with just brown ink dabbed on straight out of the pot. I do this with the barbed wire on my other vehicles and on the bases of my infantry also, as I find it gives a better aged look to the wire compared to if i watered it down. Also in this picture you can clearly see the grill at the front of the engine bay. This was achieved by sticking in bits of wire I had cut to size.

Second of the extra bits of detail is the rivets, the truck is literally covered in them. I did these following the instructions in the tutorial done by the Painting Corps, the link of which is here. Its not as hard as you would think, and no where near as time consuming as it looks. The instructions they give are very clear and easy to follow, so as long as you don't rush yourself it will come up great.

The next addition on the list was added after the main portion of the painting was done, and that's the patches of rust that cover the vehicle. Every place that has the potential to rust, has portions of rust on it. Where the rust is coming through the paint, I have used the rust effects to stain the paint. The chains holding the bench seats up, the hinges on the pintle heavy bolter, on the wheel hubs, metal plates on the wheels, everywhere. This was achieved by using a product called Scenic Rust made by Deluxe Materials. I will do a tutorial on how to use this stuff soon, as I'll soon have a few things ready to get rusted up.

This vehicle is definitely a veteran of the years, so along with the rust and old looking paint job, when it came to doing the tyres and the camo tarp I made sure that they looked old and weathered. I wanted this vehicle to look like its been neglected, perhaps salvaged after a battle or when its driver turned traitor he bought the truck into the bargain, and definitely not like its fresh off the assembly line.

The final touch to firmly place this vehicle in the Bloodpact parking lot is the addition of the most defining aspect about them: blood. Across the front is blood splatter from all the victims too slow to get out of its way, on the handles and steps is blood from boots and hands, and the tray has clotted blood strewn across the mesh, be it from the transported troops or slaughtered victims is any ones guess. The clotted look was achieved thanks to the contact adhesive i used to attach the mesh. It clumped up and leaked through the mesh and settled on top, and added into the bargain, it did so randomly.

There you have it, the completed Bloodpact looted truck, which will be used to represent a Chimera in my Bloodpact force. Comments and questions as always are welcomed.

8 comments: